Choose models and providers

A Mecatl session runs with a provider and a base model selected by the server and, optionally, by the client. The server returns the effective selection and input capabilities when the session is created.

Choose the path that matches how you use Mecatl:

• use mecatui for interactive selection;
• use the CLI to configure a server or one-shot run; or
• use the API when your client creates sessions directly.

For the rest of the terminal workflow, see Use mecatui.

Mecatui journey

When the connected server advertises model selection, type /models in mecatui. Filter the server's inventory, select a model, and press Enter. The picker warns that the choice creates a peer session and carries over the visible conversation. Replaying a long history may be costly. The existing session's provider and base model do not change.

A switch across providers keeps the visible conversation but drops provider- private replay state, such as reasoning state that the new provider cannot understand. The new session's provider, model, and capabilities are reported by the server.

When broker OAuth is enabled, this peer is also a new broker session. Protected MCP enrollment is session-scoped, so switching models may require enrolling the protected backends again; authorization is not silently copied from the old session.

Type /effort to choose a reasoning-effort tier. mecatui applies a changed tier by creating a peer session with the same provider, model, and conversation. The picker is available only when the connected server advertises the relevant capability.

mecatui model choices are server-backed. In embedded mode, the local server's configuration and credentials determine the inventory. In connect mode, the remote server determines it; local embedded-server flags and credentials do not apply.

See Use mecatui for the command-line startup, connection, and keybinding details.

CLI journey

Endpoint overrides

The built-in provider endpoint flags (--openai-base-url, --openrouter-base-url, --anthropic-base-url, and --opencode-base-url) are non-secret configuration. They override the matching operator provider_overrides setting; settings override the built-in endpoint. Custom provider URLs remain defined only by their provider definition. OpenAI and Anthropic keep their SDK endpoint when neither source supplies an override.

Configure a server default

Use deployment flags when every session on a server should start from the same provider and model:

mecated serve \
  --default-provider openai \
  --default-model gpt-5.6-terra

gpt-5.6-terra is an example model ID. Model IDs are provider-specific, so the same example is valid only when that server's OpenAI provider can use it. The server's built-in OpenAI default remains available when no explicit model is configured.

For a zero-selector session, server-side resolution is separate for provider and model:

• provider: --default-provider, otherwise the automatic available-provider preference;
• model: --model, then --default-model, then the selected provider's built-in default.

--model is a higher-priority deployment override. --default-model is the validated default for the configured default provider. An invalid deployment default fails startup rather than silently selecting a different provider or model.

mecatui accepts these flags for its embedded server. They do not reconfigure a server used through mecatui connect. mecak8s exposes the corresponding server configuration. See the operator provider and model reference for credential sources and deployment options.

Operator-defined gateways

An operator can declare a named HTTPS gateway in the user-global settings.yaml under providers: and make it the deployment default with models.default_provider. API-key gateways use the matching provider ID in the operator-local auth.yaml; credentials are never read from a project file or supplied by mecatui connect. The server snapshots these settings and credentials once while it starts, so changing either file requires a restart. When a custom provider's live model listing is unreachable, unauthorized, or empty, /models keeps its configured default model selectable and displays only a safe provider status; endpoints, credentials, and raw listing errors or response bodies are never published to clients. Built-in --*-base-url flags still take precedence over eligible built-in endpoint overrides. See the provider configuration reference for the accepted flavors and fields.

Select ToolHive gateway models

When ToolHive gateway discovery is enabled, one configured gateway identity appears as two protocol-specific Mecatl providers:

Provider ID	Model discovery	Inference
toolhive	GET /v1/models	POST /v1/responses
toolhive-anthropic	GET /anthropic/v1/models	POST /anthropic/v1/messages

Select a native Anthropic model under toolhive-anthropic. Mecatl keeps the inventories separate so that model always uses Anthropic Messages rather than the OpenAI Responses adapter. The native catalog retains the model's context and output limits plus image and thinking capabilities.

toolhive remains the automatic default between the two gateway providers. A configured key-driven provider still takes precedence unless the operator explicitly sets toolhive or toolhive-anthropic as the server default. When the gateway is available but not selected, /models shows both protocol inventories so you can choose one without removing another provider's credential.

Each provider has its own model count, availability state, and process-local last-known-good catalog. A failure or empty response from one protocol endpoint does not erase the healthy sibling inventory. Client-visible status contains no endpoint, credential, raw response body, or authentication header.

If /models reports an unreachable provider, follow its routing-mode-specific hint: start the local proxy in proxy mode, or check direct gateway connectivity and OIDC setup in direct mode. A valid credential that lists no models requires the gateway administrator to grant access. If a listed alias later fails with a routing or cost enforcement error, select a fully qualified or provider-namespaced model slug or ask the gateway administrator to add a route. Create a fresh session after correcting a previously unresolved default model.

For proxy/direct routing, OIDC setup, TLS constraints, and daemon flags, see Run mecated standalone.

Configure aliases, slots, and task routing

For a deployment with several kinds of work, use the operator-global settings.yaml to give models stable aliases and assign them to internal jobs or delegation categories:

models:
  default: gpt-5.6-terra
  aliases:
    planner: gpt-5.6-sol
    heavy: gpt-5.6-terra
    coder: gpt-5.6-luna
    quick: gemini-3.5-flash
    image: gpt-5.6-terra
  slots:
    compaction: heavy
    ask-reviewer: quick
    guardrail: coder
    plan: planner
    router: coder
    title: quick
  router:
    default-category: medium
    categories:
      - name: large
        description: Deep reasoning, architecture, and subtle concurrency bugs.
        model: heavy
      - name: medium
        description:
          Multi-file implementation, integration, and substantial tests.
        model: coder
      - name: small
        description: Focused edits, known fixes, and quick lookups.
        model: quick
      - name: image
        description: Work requiring visual input.
        model: image

These mechanisms are independent:

• Aliases map readable names to concrete provider-specific model IDs.
• Slots select models for internal calls. compaction, ask-reviewer, guardrail, plan, and router do not replace the session model. The plan slot can use a stronger model while a plan is being written; compaction and checker slots can use cheaper models.
• title is an explicit opt-in slot for automatic session-title generation. It has no fallback at all: if the binding is absent, or if it is present but cannot be resolved for the session's fixed provider, generation is disabled and the server makes no title-provider call. This differs from other invalid slot or route targets, which may warn and fall back to the session model. With a compatible title binding, the server generates a title asynchronously from up to three early genuine prompts; it never delays or changes the chat. Its token usage is stored separately as session_title, not charged to the chat's displayed usage or run budget.
• Router categories select a model for a plain delegated Subagent, an unpinned named specialist (including mode: "read-write"), a Parallel branch, or an undefined team member from the task description. A taxonomy enables the router; with no taxonomy, delegation keeps its inherited/default model.

With the example above, routing resolves as:

large  → heavy  → gpt-5.6-terra
medium → coder  → gpt-5.6-luna
small  → quick  → gemini-3.5-flash
image  → image  → gpt-5.6-terra

Resolution is fail-soft for slots and routes other than title: an invalid alias, slot, or route target warns and falls back to the session model. The title slot is the exception described above; an absent or unresolvable title binding disables generation rather than falling back or making a provider call. Explicit per-call models, model-pinned named agents, fork or resume choices, and other higher- precedence selectors are not overridden by the router. A named definition with no model: is routable; model: inherit is an explicit pin. Writable named routing keeps the specialist's direct-write scope, while explicit read-write+agent+model remains invalid. Model slots and router taxonomies are operator decisions; project model settings are ignored unless the operator explicitly allows the relevant model set on a trusted project via models.allowlist.

An allowlisted model is not scoped to a particular use: a trusted project can bind any allowlisted model to any slot, including the guardrail and ask-reviewer safety checkers, not just the session default. Do not allowlist a model you would be unwilling to see used as a safety checker.

This configuration belongs in the operator-global settings file, not a checked-in project file. See the configuration reference for the complete field schema and defaults.

Route OpenRouter models through preferred downstreams

OpenRouter can serve one model through several downstream inference providers. By default, it balances among them by price. An operator can instead set a preferred order for each model in the operator-tier settings.yaml:

openrouter:
  models:
    'anthropic/claude-sonnet-4-6':
      order: ['anthropic', 'google-vertex']
      allow_fallbacks: false
    'openai/gpt-5':
      order: ['deepinfra/turbo']

order accepts lowercase-kebab downstream slugs and disables OpenRouter's default price balancing. An absent allow_fallbacks keeps OpenRouter's default (true), so it may try other downstreams after exhausting the list. Setting it to false pins the request to the listed downstreams and can fail the turn when none are available.

This configuration is operator-tier only because it controls spend, compliance, and capabilities. Mecatl ignores a project-tier openrouter block with a warning. Invalid slugs and empty orders are also dropped with a warning.

For each OpenRouter turn, Mecatl reports the selected downstream as a provider.route event when OpenRouter supplies that metadata. The value may be absent on a cache hit. It is OpenRouter's display name, such as Google, not the configuration slug such as google-vertex, so treat it as human-readable status rather than a round-trippable identifier.

See the configuration reference for the full field schema.

Run one shot with mecatequi

mecatequi creates a new session for one prompt. It accepts model/provider defaults and reasoning-effort settings, but has no interactive model picker. Use it when the caller already knows the deployment and model configuration.

Configure reasoning effort

The accepted reasoning-effort values are:

auto, low, medium, high, xhigh, max

reasoning-effort may be set as a server default or supplied per session. The important distinction is:

• omitted effort uses the server's configured default, or the provider default when no server default exists;
• explicit auto requests the provider's default effort; and
• a valid non-empty per-session value overrides the server default.

An invalid server value is ignored with a warning and becomes unset. An invalid per-session value is ignored with a warning and falls back to the server default. The server may normalize, clamp, or drop a value according to the selected provider and known model capabilities.

The effective result is returned in resolved_model.reasoning_effort, so clients can display what the server actually applied. Provider-specific effort mapping belongs in the configuration reference, not in the selection workflow.

API journey

API clients can either omit provider/model fields and use the server defaults, or name both fields when creating a session. The fields are available through gRPC CreateSession and HTTP POST /v1/sessions.

HTTP example

The HTTP/SSE API accepts JSON. For example:

curl -sS -X POST http://127.0.0.1:8081/v1/sessions \
  -H 'Content-Type: application/json' \
  -d '{
    "workspace": "/absolute/repo",
    "provider_id": "openai",
    "model_id": "gpt-5.6-terra"
  }'

The request requires a usable workspace and an available provider. The model ID is passed to the selected provider; it does not need to appear in the server's curated inventory to be accepted. A provider that is unknown or unavailable is rejected.

Selector rules

provider_id	model_id	Result
omitted	omitted	Use the server-resolved provider and model.
set	omitted	Use that provider's own default model. The server's --default-model does not carry across to a different explicitly selected provider.
set	set	Use that provider and pass the model ID through to it. An uncatalogued model may be accepted and fail later at the provider.
omitted	set	Reject the request: a bare model ID is ambiguous.
unknown or unavailable	any	Reject the request; do not silently fall back to another provider.

A bare model_id returns HTTP 400 or gRPC InvalidArgument. The same applies to an unknown or unavailable provider. The API returns the new session ID and resolved model information after successful creation.

See Drive via gRPC / HTTP for the shared session lifecycle and the HTTP/SSE API reference for endpoint details.

Model inventory and capabilities

ListModels and mecatui's /models inventory expose public metadata, including:

• provider ID and opaque model ID;
• display name when available;
• image-input support;
• reasoning support; and
• context limit when known.

They do not expose API keys or provider-private credentials. The inventory is server-specific and can differ according to the providers and credentials configured at startup. A provider's live model catalog may refresh while the server is running.

Models whose catalog includes it can call the read-only DiscoverModels tool to inspect this same resolved inventory. Results contain the exact provider_id plus model_id selection handle and the same safe metadata as ListModels; equal model IDs under different providers remain separate. Exact provider/model filters are supported. Output defaults to 20 entries and is capped at 50 entries and 32 KiB. The tool does not probe providers, accept endpoints or credentials, or change the current session, and remains available in no-filesystem sessions.

For a known model, the session's effective capabilities combine the model's metadata with the selected adapter's transport capabilities. For an uncatalogued model ID accepted through an explicit provider, the server can report only what the adapter itself knows. Treat the capabilities returned for the created session as authoritative.

Limitations

• Provider credentials and model availability belong to the server host. A connected mecatui cannot use credentials configured only on the TUI host.
• Model IDs are provider- and deployment-specific opaque strings.
• Listing a model does not guarantee that a later provider request will succeed.
• In mecatui, changing the provider or base model creates a peer session. The client adopts the peer's complete authoritative transcript before making it interactive, then closes the source best-effort; if creation or transcript hydration fails, the open source chat remains available. API clients must implement equivalent history carryover themselves when they create a new session.
• Provider/model selection flags configure an embedded or server deployment; they do not override a remote server reached with connect.

Next steps

• Use mecatui for the interactive model and effort pickers.
• Start and resume sessions for session creation and continuation.
• Context windows for context limits and fallback.
• Capability and deployment matrix for deployment availability.